Kunshan Xuan Yida machinery introduction: the use of industrial resin inspection tool characteristics and advantages of what?
Characteristics and advantages of resin inspection tools:
Fixture is used to control the industrial production enterprise product sizes (such as pore size, spatial size, etc.) of simple tools, improve production efficiency and quality control, is suitable for mass production of products, such as auto parts, to replace professional measurement tools, such as smooth plug gauge, thread plug gauge, diameter gauge, vernier caliper, depth gauge measuring tool, the fixture. In a broad sense, a special size error measuring tool with adjustable and most parts reusable can be classified as a flexible measuring tool.
Flexible fixture has some traditional fixture is no special advantage, mainly includes: a flexible fixture with a little tweaking can measure different products (one-to-many or adjustable, saving storage space, components can be reused), automatic measurement, automatic data records, high measurement precision, is not afraid of deformation (low maintenance costs), short development cycle, etc.
Resin fixture
The flexible inspection tool is an important supplement to the traditional inspection tool. In some occasions, for example, the traditional inspection tool can only be used when the space is small and it is difficult to install the probe. At present, the flexible fixture can not completely replace the traditional fixture.
The precision of the flexible checking tool is guaranteed by the precision of the probe. Because the probe can be reset to zero, even if the tool accuracy is low or deformed, as long as the probe is reset to zero, the system can automatically complete the compensation, basically will not affect the use.
The flexible tester uses probe to measure the error, so the measuring point is discrete. The traditional measuring tool is the reference surface as the benchmark, and the measuring point is continuous. Flexible tester is automatic measurement, need a stable power supply; Traditional instruments are usually purely mechanical measurement, generally do not need power supply.
